Spray Foam, Coatings and Spray On Bedliner Contractors!
I'm not a Johnny come lately to this and I am a trusted seller with over 6000 positive feedback form items sold in the foam and coating industry!
I have been in the coatings and foam industry for 15+ years and know what works and what doesn't!
I am NOT a salesman from some supplier, but one of you!
Just look at my feedback and longevity as a trusted seller.
View My Feedback
Hey guys, I am concerned about the pricing at Graco and this is one of the ways I'm improving your bottom line, not Graco's!!
Well, worry no more!!!
Professor Foam is here to the rescue!!!
Here is another deal for you from Professor Foam!
This is an auction for a transfer pump. Well, that is not the most exciting part,
but it can stop you dead in your tracks and cost you lots of $$!
Most distributors are sending units out with OP 232C Gusmer pumps:
The Main problem with them:
1) COST! $$$ then there is the cost!
2) Then there is the cost!
This pump that I'm offering is an IPM 01 1:1
It has no plastic washers to break! The air motor has o rings that will last much longer!
The output is well above any production to most spray units! See chart below for exact specs.
IPM’s IP-01 series of pumps are general purpose transfer pumps designed for use with a wide variety of materials. The air driven motor is designed with simplicity in mind for years of use in less than desirable conditions.
Features
- Fully air operated
- 2-Ball Piston design provides uniform positive displacement
- Extremely durable pump with long life packing
Materials
- Isocyanates
- Catalysts
- Adhesives
- Resins
- Polyurea
- Polyurethane
Applications
- Plural-component material supply
- Polyurea coatings
- Polyurethane foam
- Fluid transfer
- Tank and pipe linings
|
IP-01
Performance Specifications
| Pressure Ratio: |
1 : 1 |
| Maximum Fluid Flow: |
4gpm (15 Ipm) |
| Air Motor Diameter: |
1.4" (3.6cm) |
| Air Inlet Pressure Range: |
40 - 180psi (3 - 12bar) |
| Maximum Fluid Pressure: |
180psi (12bar) |
| Air Inlet Size: |
1/4"npt (f) |
| Fluid Inlet Size: |
1 1/2"npt (f) (Stubby) |
| Fluid Outlet Size: |
3/4"npt (f) |
| Rod & cylinder: |
CS & SST |
| Throat Packing: |
Polyethylene |
| Piston Packing: |
UHMWPE |
|
Length: Drum Length:
Stubby:
|
51.8" (1315mm)
24.2" (615mm)
|
|
Weight: Drum Length:
Stubby:
|
18.0 lb (8.2kg)
12.0 lb (5.5kg)
|
|
|
I can get this overnighted to you, call me for a quote.
I will ship this international, please call me for a shipping quote
Ok if you want more information drop me a line..
CALL TODAY! 346-808-8183 it's my cell phone... or my store professorfoam.com
